Putting Design to the Test
| Home | |
Testing Services | |
Request A Quote | |
Contact Us |
SCOPE OF ACCREDITATION TO ISO/IEC 17025-2005
DATASYST Engineering & Testing Services, Inc.
S14 W33511 Highway 18
Delafield, WI 53018
Andrew A. Hoisington Phone: 262 968 4003
FAX: 262 968 3050
Email:
MECHANICAL
Valid To: December 31, 2009 Certificate Number: 2107.01
In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on mechanical assemblies and electrical components:DATASYST Engineering & Testing Services, Inc.
S14 W33511 Highway 18
Delafield, WI 53018
Andrew A. Hoisington Phone: 262 968 4003
FAX: 262 968 3050
Email:
MECHANICAL
Valid To: December 31, 2009 Certificate Number: 2107.01
| Vibration Characteristics: (sine, random, sin-on-random) | |
| Frequency: | DC to 3000Hz Up to 30,000 Force Pounds |
| Temperature: | (-73 to +177)°C |
| Mechanical Shock | |
| Pulse: | (0.1 to 300) g's Electro-Dynamic |
| Temperature: | (-73 to +177)°C |
| Humidity: | (5 to 95)% RH (Temperature Dependent) |
| Mechanical Impact (Drop up to 45 feet) | |
| Durability / Mechanical Cycling (Using forces produced by hydraulic actuation with force and/ or position feedback) | |
| Environmental Simulation | |
| Temperature: | (-73 to +177)°C |
| Thermal Shock: | (-73 to +177)°C within 3 seconds |
| Humidity: | (5 to 95)% RH |
| Temperature/ Altitude: | (0 to +177)°C: Sea level to 40,000 feet or 24 inches Hg |
| Durability / Fatigue: | Force to 30,000 pounds Displacement to 10 inches Velocity 35 inches per second |
| Using customer supplied test methods or specifications related to the testing parameters listed above as well as the test specifications and test methods listed below. | |
| Test: | Test Method: |
| Air Temperature/Humidity | ETSI EN300 019-2-1 v.2.1.2 |
| Air Temp/RH/Vibration (Sine & Random)/Shock/Fall | ETSI EN300 019-2-2 v.2.1.2 |
| Air Temp/RH/Vibration (Sine & Random)/Shock | ETSI EN300 019-2-3 v.2.1.3 |
| NEBS | |
| Temperature, Humidity, Altitude | GR-63-CORE, 5.1 |
| Shock | GR-63-CORE, 5.3 |
| Vibration | GR-63-CORE, 4.4 |
| Temperature | IEC 68-2-1 |
| Vibration (Sine) | IEC 68-2-6 |
| Shock Up to 300G's | IEC 68-2-27 |
| Damp Heat | IEC 68-2-28 |
| Damp Heat (Cyclic) | IEC 68-2-30 |
| Temperature/Humidity (Cyclic) | IEC 68-2-38 |
| Vibration (Broadband) | IEC 68-2-64 |
| Strain gage application (installation of bonded resistance strain gages) | ASTM E1237 |
| Mechanical Cycling / Durability | Cycling using forces produced by hydraulic actuation with force and / or position feedback) |
| Packaged Products for Parcel Delivery Systems - 150 lbs or Less | ISTA 3C, 2006 |
| Vibration, Environmental Conditions | |
| Humidity (Steady State) | MIL-STD 202G, 103B |
| Shock | MIL-STD 202G, 213B |
| Vibration | MIL-STD 202G, 201A |
| Vibration (High Frequency) | MIL-STD 202G, 204D |
| Vibration (Random) | MIL-STD 202G, 214A |
| Vibration | MIL-STD 810F, 514 |
| Shock | MIL-STD 810F, 516 |
| Gunfire Vibration | MIL-STD 810F, 519 |
| Icing/Freezing Rain | MIL-STD 810F, 521 |
| Altitude (up to 50,000 ft) | MIL-STD 883E, 1001 |
| Immersion | MIL-STD 883E, 1002 |
| Moisture Resistance (80-100% RH except Hipot) | MIL-STD 883E, 1004 |
| Steady State Life | MIL-STD 883E, 1005 |
| Intermittent Life | MIL-STD 883E, 1006 |
| Agree Life (MIL-STD 781) | MIL-STD 883E, 1007 |
| Stabilization Bake (up to 170°C) | MIL-STD 883E, 1008 |
| Temperature (Cyclic, -73 to 170)°C | MIL-STD 883E, 1010 |
| Mechanical Shock | MIL-STD 883E, 2002 |
| Vibration Fatigue | MIL-STD 883E, 2005 |
| Vibration, (Variable Frequency) | MIL-STD 883E, 2007 |
| Test: | Test Method: |
| Humidity | MIL-STD 1344A, 1002 |
| Temperature (Cyclic) | MIL-STD 1344A, 1003 |
| Temperature Life | MIL-STD 1344A, 1005 |
| Fluid Immersion | MIL-STD 1344A, 1016 |
| Shock (Specified Pulse - Ed Shakers) | MIL-STD 1344A, 2004 |
| Vibration | MIL-STD 1344A, 2005 |
| Cable Pull-out | MIL-STD 1344A, 2009 |
| Insert Retention | MIL-STD 1344A, 2010 |
| Temperature and Altitude | RTCA DO 160, 4 |
| Temperature Variation | RTCA DO 160, 5 |
| Humidity | RTCA DO 160, 6 |
| Operational Shock and Crash Safety | RTCA DO 160, 7 |
| Vibration | RTCA DO 160, 8 |
| SAE J1211 Recommended Environmental Practice for Electronic Equipment Environmental Factors and Test Methods - Following Sections |
|
| Recommended Environmental Practice for Electronic Equipment | SAE J12111 |
| Environmental Factors and Test Methods | SAE J1211, 4 |
| Temperature | SAE J1211, 4.1 |
| Humidity | SAE J1211, 4.2 |
| Immersion and Splash | SAE J1211, 4.4 |
| Altitude | SAE J1211, 4.6 |
| Mechanical Vibration | SAE J1211, 4.7 |
| Mechanical Shock | SAE J1211, 4.8 |
| SAE J1455 Recommended Environmental Practice for Heavy-Duty Trucks Environmental Factors and Test Methods - Following Sections |
|
| Recommended Environmental Practice for Heavy-Duty Trucks | SAE J1455 |
| Environmental Factors and Test Methods | SAE J1455, 4 |
| Temperature | SAE J1455, 4.1 |
| Humidity | SAE J1455, 4.2 |
| Immersion and Splash | SAE J1455, 4.4 |
| Altitude | SAE J1455, 4.9 |
| Mechanical Vibration | SAE J1455, 4.10 |
| Mechanical Shock | SAE J1455, 4.11 |
| Drop Testing | CFR 49 Para. 178.603 |
Home | Contact Us | Testing Services | Testing Methods | Request A Quote | Resources| Career Opportunities | About DATASYST | Certifications | Site Map
DATASYST Engineering & Testing Services, Inc.
S14 W33511 Highway 18
Delafield, WI 53018
262 968-4003
Fax: 262 968-3050
800 969-4050
Copyright © DATASYST Privacy Statement
){kind=link}
){kind=link}
